Haga clic en la imagen para ampliarla
¿Qué es el agua pura tipo 1?
Hay varios tipos diferentes de agua, nos especializamos en la producción de tres tipos en particular: Tipo I, Tipo II y Tipo III.
Campo de aplicación
Type I grade water, also known as Ultrapure Water, is the highest quality level of water to be produced. It's used for the most critical applications and advanced analytical procedures.
Esto incluye:
● Cell and Tissue Cultures
● Liquid Chromatography, including High Performance Liquid Chromatography (HPLC)
● Gas Chromatography
● Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
● Molecular Biology
El Tipo I también se puede utilizar en aplicaciones que requieren agua Tipo II. Esta es una práctica bastante común que puede ayudar a evitar la generación de subproductos-durante las aplicaciones.
Características del sistema de agua pura de laboratorio tipo 1
▲ LCD displays the system operation condition.
▲ Indicating system of online failure monitoring could automatically detect and fix program error of the micro computer control system.
▲ Raw water conductivity, RO water conductivity and UP water resistivity could be all detected and display on LCD.
▲ Both RO water and UP water are available.
▲ Power on self detection, water lacking protecting alarm, self-reset in case of power off, auto-stop when water full, lower pressure protection, automatically RO flushing.
▲ USA RO membrane could greatly ensure the output water quality, meanwhile prolong the service life of purification and ultra purification column.
▲ Integrated and modular design, compact construction.
▲ Consumable parts failure alarm and replacement reminding(optional)
▲ UP water circulation design make the output water reach 18.25 MΩ·cm (25 degree ) faster.
▲ Automatically flush for RO membrane, prolong the service life.
▲ UP water outlet is equipped with 0.22μm bladder terminal micro filter which guarantee the output water quality
▲ Top brand components.
▲ Fast-inserting design makes the system to be easier to maintenance and replace.
▲ ABS shell, corrosion resisting and easy to clean.
▲ The equipment is finished commissioning, so it can be put into use only by pipe and power connecting. The system is user friendly with one-button start up. After start up, the system will enter the air evacuation process automatically to protect the RO membrane from gas hammer phenomenon. After that, the system will steps to UP water producing.
Guía de instalación
Nuestro servicio
a. Brindamos soporte técnico completo y después de la instalación del equipo.
b.Ayudamos a capacitar al operador del sistema. Y se proporciona un manual de instrucciones detallado.
c.724 horas de asistencia telefónica sobre soporte técnico.
d.Ofrecemos consumibles y piezas de repuesto a largo-plazo a precio de coste.
http://es.rxd-purewatersystem.com/